Filter
Top Products
Chapter 37 Cisco Common Classification Policy Language
Class Maps
37-8
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
URL Filtering Parameter Map
URL filtering parameter maps can specify URL filtering servers and local URL
lists. You can select an existing parameter map. If no parameter map is configured,
this field is disabled. Click View to display the selected parameter map without
leaving this dialog.
Enable Application Inspection
An application inspection policy specifies the types of data to inspect in packets
of a specified application. You can select an existing application inspection
policy. If no application inspection policy is configured, this field is disabled.
Click View to display the selected application inspection policy without leaving
this dialog.
Police Rate and Burst
You can limit traffic to a specified police rate and specify a burst value. The police
rate can be a value between 8,000 and 2,000,000,000 bits per second. The burst
rate can be a value between 1,000 and 512,000,000 bytes.
QoS Class Map
Use this window to display and edit QoS class map information. QoS class maps
are used in QoS policy maps to define types of traffic.
Click a class map name to display details about that class map in the Details of
Class Map area.
The details of a class map show which protocols are matched to define the traffic.
The following example shows details of a voice signaling class map.
Details of Class Map:SDMSignal-FastEthernet0/1
Item Name Item Value
Match Protocols h323,rtcp
H.323 and RTCP are the voice signaling protocols to be matched.