Chapter 29 Quality of Service
Editing QoS Policies
29-10
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Step 2 In the Cisco SDM toolbar, click Configure.
Step 3 In the Cisco SDM taskbar, click QoS.
Step 4 Click Edit QoS Policy.
Step 5 Choose the QoS policy that you want to edit.
Step 6 Click Edit. Then, make changes to the settings in the displayed dialogs.
Step 7 Click OK to close the dialog and send the changes to the router.
Step 8 If you checked Preview commands before delivering to router in the Edit
Preferences screen, the Cisco IOS CLI commands that you are sending are
displayed. Click Deliver to send the configuration to the router, or click Cancel
to discard it. If you did not make this setting, clicking Finish sends the
configuration to the router.
Edit QoS Policy Reference describes the configuration screens.
Edit QoS Policy Reference
The topics in this section describe the configuration screens.
• Edit QoS Policy
• Associate or Disassociate the QoS Policy
• Add or Edit a QoS Class
• Edit Match DSCP Values
• Edit Match Protocol Values
• Add Custom Protocols
• Edit Match ACL
Edit QoS Policy
The Edit QoS Policy window allows you to view and change configured QoS
policies, and associate policies with router interfaces. This help topic contains
separate sections for different parts of the screen. To view the information for a
section, click on the section heading.