Filter
Top Products
28-7
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter 28 Network Module Management
Network Module Login
IDS NM Interface Monitoring Configuration
Use this window to select router interfaces whose traffic you want the IDS
network module to monitor.
Monitored Interfaces
This lists contains the interfaces whose traffic the IDS network module is
monitoring. To add an interface to this list, select an interface from the Available
Interfaces list, and click the left arrow (<<) button. To remove an interface from
this list select the interface and click the right arrow (>>) button.
Available Interfaces
This lists contains the interfaces whose traffic the IDS network module is not
currently monitoring. To add an interface to the Monitoring Interfaces list, select
the interface, and click the left arrow (<<) button.
Network Module Login
Enter the username and password required to login to the network module. These
credentials may not be the same credentials required to log in to the router.
Feature Unavailable
This window appears when you try to configure a feature that the Cisco IOS image
on your router does not support. If you want to use this feature, obtain a Cisco IOS
image from Cisco.com that supports it.
Switch Module Interface Selection
This window is displayed when there is more than one switch module installed on
the router, and allows you to select the one that you want to manage. Click the
radio button next to the switch module that you want to manage, and then click
OK.