Filter
Top Products
Chapter 35 Authentication, Authorization, and Accounting
Configuring AAA
35-2
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Configuring AAA
To configure AAA, complete the following steps:
Step 1 If you want to review the IOS CLI commands that you send to the router when
you complete the configuration, go to the Cisco SDM toolbar, and click Edit >
Preferences > Preview commands before delivering to router. The preview
screen allows you to cancel the configuration if you want to.
Step 2 In the Cisco SDM toolbar, click Configure.
Step 3 In the Cisco SDM taskbar, click Additional Tasks.
Step 4 In the Additional Tasks tree, click AAA.
Step 5 In the AAA screen, click Enable AAA. This enables AAA on the router.
Step 6 Click + (the plus sign) next to the AAA folder to display other AAA branches.
Step 7 Click the branch for the type of configuration you need to perform.
Step 8 In the displayed AAA screen, click Add to create a configuration, or select an
existing entry in the screen, and click Edit to change configuration settings.
Step 9 Make configuration settings in the displayed dialogs, and click OK to send the
configuration to the router. If you checked Preview commands before delivering
to router in the Edit Preferences screen, the Cisco IOS CLI commands that you
are sending are displayed. Click OK to send the configuration to the router, or
click Cancel to discard it.
AAA Screen Reference
The topics in this section describe the AAA configuration screens:
• AAA Root Screen
• AAA Servers and Server Groups
• AAA Servers
• Add or Edit a TACACS+ Server
• Add or Edit a RADIUS Server