31-3
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter 31 Router Properties
Date and Time: Clock Properties
Date/Time
You can see the router date and time settings on the right side of the Cisco SDM
status bar. The time and date settings in this part of the Clock Properties window
are not updated.
Router Time Source
This field can contain the following values:
• NTP – The router receives time information from an NTP server.
• User Configuration – The time and date values are set manually, using Cisco
SDM or the CLI.
• No time source – The router is not configured with time or date settings.
Change Settings
Click to change the date and time settings on the router.
Date and Time Properties
Use this window to set the router date and time. You can have Cisco SDM
synchronize the settings with the PC, or you can set them manually.
Synchronize with my local PC clock
Check to set up Cisco SDM to synchronize router date and time settings with the
date and time settings on the PC.
Synchronize
Click to have Cisco SDM synchronize time settings. Cisco SDM adjusts date and
time settings in this way only when you click Synchronize. Cisco SDM does not
automatically resynchronize them with the PC during subsequent sessions. This
button is disabled if you have not checked Synchronize with my local PC clock.