Chapter5 Configuring WAN Connections
Configuring a DSL Connection
5-14
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Step 7 Cisco SDM displays the Summary screen when you have completed the
configuration. Review the configuration. If you need to make changes, click Back
to return to the screen in which you need to make changes, then return to the
Summary screen.
Step 8 If you want to test the connection after sending the configuration to the router,
check Test the connectivity after configuring. After you click Finish, Cisco
SDM tests the connection and displays the test results in another screen.
Step 9 To send the configuration to the router, click Finish.
The DSL Connection Reference describes the screens that Cisco SDM displays.
DSL Connection Reference
• WAN Wizard Interface Welcome Window
• Select Interface
• Encapsulation: PPPoE
• Encapsulation Autodetect
• IP Address: ATM or Ethernet with PPPoE/PPPoA
• IP Address: ATM with RFC 1483 Routing
• Authentication
• Advanced Options
• PVC
• Summary
IP Address: ATM or Ethernet with PPPoE/PPPoA
Choose the method that the WAN interface will use to obtain an IP address.