Filter
Top Products
14-5
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter 14 Enhanced Easy VPN
The group name, IP address pool name, DNS and WINS server names, and
domain name of each configured group is shown in the list. When you click Add
to configure settings for a new group or click Edit to change settings, the changes
appear in this list. To use settings for an existing group as a basis for a new group
configuration, select the existing group and click Clone. The Add, Edit, and Clone
buttons display dialogs that enable you to configure group settings.
Configure Idle Timer
Check Configure Idle Timer if you want to specify how long a connection is to
be maintained for idle clients in the Idle Timer fields. Enter time values in
HH:MM:SS format. For example, to enter 3 hours, 20 minutes, and 32 seconds,
enter the following values in the fields:
03:20:32
The timeout value will apply to all groups configured for this connection.
Add or Edit Easy VPN Server: General Tab
Enter general information for the Easy VPN Server connection in this dialog.
Name for this connection
Enter a name to identify this connection the name that you enter is displayed in
the Edit Easy VPN Server window.
IP Address of Virtual Tunnel Interface
Click Interface and Authentication for a description of the IP Address of Virtual
Tunnel fields.
Tunnel Mode
Choose IPSec-IPV4 in the Tunnel Mode field. The IPSec-IPV4 option enables the
creation of a IP version 4 IPSec tunnel.
Description
You can enter a description that administrators in you network will find useful
when changing configurations or troubleshooting the network.