30-3
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter 30 Network Admission Control
Create NAC Tab
Step 3 Install and configure the posture validation and remediation server.
If you are a registered Cisco.com user, you can download Cisco Trust Agent
(CTA) software from the following link:
http://www.cisco.com/cgi-bin/tablebuild.pl/cta
The document at the following link explains how to install and configure CTA
software on a host.
http://www.cisco.com/en/US/products/ps5923/products_administration_guide_b
ook09186a008023f7a5.html
The document at the following link contains an overview of the configuration
process.
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns466/c654/cdccont_0
900aecd80217e26.pdf
Documents at the following link explain how to install and configure Cisco Secure
ACS for Windows Servers version 3.3.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs3
3/index.htm
Welcome
The NAC wizard enables you to do the following:
• Choose the interface on which NAC is to be enabled—Hosts attempting
access to the network through this interface must undergo the NAC validation
process.
• Configure NAC Policy Servers—Admission control polices are configured on
these servers, and the router contacts them when a network host attempts to
access the network. You can specify information for multiple servers. NAC
policy servers use the RADIUS protocol.