Chapter 29 Quality of Service
Creating a QoS Policy
29-2
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Step 7 To send the configuration to the router, click Finish.
Step 8 If you checked Preview commands before delivering to router in the Edit
Preferences screen, the Cisco IOS CLI commands that you are sending are
displayed. Click Deliver to send the configuration to the router, or click Cancel
to discard it. If you did not make this setting, clicking Finish sends the
configuration to the router.
Create a QoS Policy Reference describes the configuration screens.
Create a QoS Policy Reference
The topics in this section describe the configuration screens.
• Create QoS Policy
• QoS Wizard
• Interface Selection
• Queuing for Outbound Traffic
• Add a New Traffic Class
• Policing for Outbound Traffic
• QoS Policy Generation
• QoS Configuration Summary
Create QoS Policy
The QoS Wizard allows a network administrator to enable Quality of Service
(QoS) on the router’s WAN interfaces. QoS can also be enabled on IPSec VPN
interfaces and tunnels.
The policy is applied to outgoing traffic on the interface.
To create a QoS policy, click Launch QoS Wizard.