5-7
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter 5 Configuring WAN Connections
Configuring a Serial Connection
Step 7 Cisco SDM displays the Summary screen when you have completed the
configuration. Review the configuration. If you need to make changes, click Back
to return to the screen in which you need to make changes, then return to the
Summary screen.
Step 8 If you want to test the connection after sending the configuration to the router,
check Test the connectivity after configuring. After you click Finish, Cisco
SDM tests the connection and displays the test results in another screen.
Step 9 To send the configuration to the router, click Finish.
The Serial Connection Reference describes the screens that Cisco SDM displays.
Serial Connection Reference
• WAN Wizard Interface Welcome Window
• Select Interface
• IP Address: Serial with Point-to-Point Protocol
• IP Address: Serial with HDLC or Frame Relay
• Authentication
• Configure LMI and DLCI
• Configure Clock Settings
• Advanced Options
• Summary
IP Address: Serial with Point-to-Point Protocol
Choose the method that the point-to-point interface will use to obtain an IP
address.
Field Reference
Table 5-6 describes the fields in this screen.