Chapter 28 Network Module Management
IDS Network Module Management
28-6
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Date & Time
IP CEF Setting
IDS NM Initial Setup
For more information on configuring the IDS module, refer to the documents at
the following link.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids10/index.htm
Refresh
If this row contains an X icon in the Action column, the router’s clock
settings have not been configured. Double-click on this row, and enter time
and date settings in the Date and Time Properties window.
If this row contains an X icon in the Action column, Cisco Express
Forwarding (CEF) has not been enabled on the router. Double-click on this
row, and click Yes to enable IP CEF on the router.
If this row contains an X icon in the Action column, Cisco SDM has
detected that the IDS Network Module’s default IP address has not been
changed. Double-click on this row, and Cisco SDM will prompt you to
open a session to the IDS module and complete configuration.You can use
Telnet or SSH for this session.
After you have fixed configuration settings, you can click this button to
refresh the checklist. If an X icon remains in the Action column, a
configuration setting has still not been made.