Filter
Top Products
Chapter 12 Easy VPN Remote
Administering Easy VPN Remote Connections
12-26
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
The Cisco Easy VPN Remote feature implements the Cisco Unity Client protocol,
which allows most VPN parameters to be defined on a VPN remote access server.
This server can be a dedicated VPN device, such as a VPN 3000 concentrator or
a Cisco PIX Firewall, or it can be a Cisco IOS router that supports the Cisco Unity
Client protocol.
Field Reference
Table 12-9 describes the fields in this screen.
Table 12-9 Easy VPN Remote General Settings Fields
Element Description
Name Enter a name for the Easy VPN remote configuration.
Servers You can specify up to ten Easy VPN servers by IP address or
hostname, and you can order the list to specify which servers the
router will attempt to connect to first.
Click Add to specify the name or the IP address of a VPN
concentrator or server for the router to connect to, and then enter the
address or hostname in the window displayed.
Click Delete to delete the specified IP address or hostname.
Click Move Up to move the specified server IP address or hostname
up in the list. The router attempts to contact routers in the order in
which they appear in this list.
Click Move Down to move the specified IP address or hostname
down the list.
Mode
Client Choose Client mode if you want the PCs and other devices on the
router’s inside networks to form a private network with private IP
addresses. Network Address Translation (NAT) and Port Address
Translation (PAT) will be used. Devices outside the LAN will not be
able to ping devices on the LAN or to reach them directly.