Filter
Top Products
Chapter 29 Quality of Service
Editing QoS Policies
29-14
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Field Reference
Table 29-9 describes the fields in this screen.
Add Service Policy to Class
In this screen, add an existing service policy to a QoS class.
Table 29-9 Add Class for New Policy
Element Description
Policy Name Enter a name for the QoS Policy.
Class Name Enter a name for the traffic class.
Classification
Match Specify whether the QoS class is to look for matches to Any or to
All of the selected criteria. If you choose Any, traffic must meet
only one of the match criteria. If you choose All, traffic must meet
all of the match criteria. The DSCP values chosen are displayed in
the DSCP column.
• Any—Click Any to specify that traffic must meet only one of
the criteria specified in the classification list that you create.
• All—Click All to specify that traffic must meet all the criteria
specified in the classification list that you create.
Item Name This column displays the types of criteria that you can include in
this traffic class. If the QoS policy uses NBAR protocol discovery,
you can specify protocol and ACL values. If the QoS policy uses
DSCP marking, you can specify DSCP values as well as protocol
and ACL values.
Item Value This column displays the values configured for the particular type,
separated by commas. For example, the Protocol row might show
the following values:
http, edonkey, dhcp
Edit To add or edit the values for a particular type of entry, select the
type, and click Edit. Then, add or modify entries for type in the
displayed dialog.