Filter
Top Products
Understanding the System Menus |
109
❚
Admin Settings >
Maintenance
Use the Maintenance menu to initialize the non-volatile (NV) memory, configure the
plain paper quality adjustment settings, and configure the security settings.
❚
Admin Settings > Maintenance >
Paper Density
Specifies paper density settings.
❚
Admin Settings > Maintenance >
Adjust Transfer Belt Unit
Adjusts the transfer bias when the faint image of the previous page, a part of the page
currently printing, etc. appear on the output.
❚
Admin Settings > Maintenance >
Adjust 2nd BTR
NOTE:
• The print quality changes depending on the setting values you select for this item.
Specifies the transfer roller voltage adjustment for each paper type. If you see mottles on
the print output, try to increase the voltage. If you see white spots on the print output, try
to decrease the voltage. For details about the setting values, see "Adjust 2nd BTR."
❚
Admin Settings > Maintenance >
Adjust Fusing Unit
NOTE:
• The print quality changes depending on the setting values you select for this item.
Adjusts the temperature setting of the fusing unit for each paper type. When the
printouts are curled, try to lower the temperature. When the toner does not fuse on the
paper properly, try to increase the temperature. For details about the setting values, see
"Adjust Fusing Unit."
❚
Admin Settings > Maintenance >
Color Reg Adjust
❚
Admin Settings > Maintenance >
Clean Developer and Transfer Unit
Stirs the developer in the drum cartridge and cleans the transfer unit.
K Offset If faint black colored ghosts appear, try to decrease the value.
YMC Offset If faint ghosts in color (yellow, magenta, or cyan) appear, try to
decrease the value.
Auto Correct Automatically performs color registration correction.