Filter
Top Products
156
| Dell™ Printer Configuration Web Tool
NOTE:
• This is available on Dell H625cdw and Dell H825cdw.
Printer Maintenance
The Printer Maintenance tab includes the Paper Density, Adjust Transfer Belt Unit,
Adjust 2nd BTR, Adjust Fusing Unit, Color Registration Adjustments, Clean Developer,
Reset Defaults, Initialize Print Meter, Clear Stored Jobs, Non-Dell Toner, Adjust
Altitude, Clock Settings, and Web Link Customization pages.
Paper Density
Specifies the paper density for the plain paper and labels.
Adjust Transfer Belt Unit
Adjusts the transfer bias when the faint image of the previous page, a part of the page
currently printing, etc. appear on the output.
Adjust 2nd BTR
Specifies the optimum voltage settings for printing for the 2nd Belt Transfer Roller (2nd
BTR). To lower the voltage, set negative values. To increase, set positive values. If you see
mottles on the print output, try to increase the voltage. If you see white spots on the
print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Adjust Fusing Unit
Specifies the optimum temperature settings for printing for the fusing unit. To lower the
temperature, set negative values. To increase, set positive values. When the printouts are
Adjust Transfer Belt
Unit
K Offset If faint black colored ghosts appear, try to decrease the
value.
YMC Offset If faint ghosts in color (yellow, magenta, or cyan) appear,
try to decrease the value.
Adjust 2nd BTR Plain
(60-90g/m
2
)
Sets the reference voltage setting for the transfer roller
for each paper type.
Plain Thick
(91-105g/m
2
)
Covers
(106-176g/m
2
)
Covers Thick
(177-220g/m
2
)
Coated
(106-176g/m
2
)
Coated Thick
(177-220g/m
2
)
Label
Envelope
Recycled