Filter
Top Products
Print Media Guidelines |
193
– Are stuck together or damaged in any way
– Contain windows, coated linings, self-stick adhesives, holes, perforations,
cutouts, or embossing
– Use metal clasps, string ties, or metal folding bars
– Have an interlocking design
– Have postage stamps attached
– Have any exposed adhesive when the flap is in the sealed or closed position
– Have nicked edges or bent corners
– Have rough, cockle, or laid finishes
Recommended Labels
• Label adhesives, face sheet, and topcoats must be able to withstand temperatures of
205°C (401°F) and pressure of 25 pounds per square inch (psi) without sealing,
excessive curling, wrinkling, or releasing hazardous emissions.
• Use labels without sealing, excessive curling, wrinkling, or releasing hazardous
emissions.
• Do not use label sheets with a slick backing material.
• Do not use labels that have exposed adhesive.
• Do not use label sheets that have adhesive to the edge of the sheet. It is
recommended that zone coating of the adhesive is done at least 1 mm (0.04 inch)
away from edges. Otherwise, a jam may occur in the printer, and adhesive material
may contaminate the printer and cartridges.
WARNING:
• Contaminating the printer and cartridges with adhesive could void your printer and cartridge
warranties.
Print Media Storage Guidelines
For proper print media storage, the following guidelines help you to avoid print media
feeding problems and uneven print quality.
• Store print media in an environment where the temperature is approximately 21°C
(70°F) and the relative humidity is 40 percent.
• Store print media on a flat surface so that the edges do not buckle or curl.
• Print media should be stored on pallets, cartons, shelves, or in cabinets, rather than
directly on the floor.
• Do not place anything on top of the print media packages.