Filter
Top Products
154
| Dell™ Printer Configuration Web Tool
Scan Defaults
Creates your own default scan settings.
Transmission
Defaults
Redial Attempts Sets the number of redial attempts to make if
the destination fax number is busy. If you enter
0, the printer does not redial.
Interval of Redial Sets the interval between redial attempts.
Resend Delay Sets the interval between re-send attempts.
Tone/Pulse Sets whether to use tone or pulse dialing.
Prefix Dial Sets whether to set a prefix dial number.
Prefix Dial
Number
Sets a prefix dial number of up to five digits. This
number dials before any auto dial number is
started. It is useful for accessing the Private
Automatic Branch Exchange (PABX).
Fax Cover Page Sets whether to attach a cover page to faxes.
Fax Header Sets whether to print the information of the
sender on the header of faxes.
ECM Sets whether to enable the Error Correction
Mode (ECM). To use the ECM, the remote
machines must also support the ECM.
Modem Speed Allows you to adjust the fax modem speed
when a fax transmission or reception error
occurs.
Display Manual
Fax Recipients
Sets whether to show the fax number of the
recipient on the Sending Fax screen when
manually sending a fax.
Fax Reports Fax Activity Sets whether to automatically print a fax activity
report after every 50 incoming and outgoing fax
communications.
Fax Transmit Sets whether to print a transmission report after
every fax transmission or only when an error
occurs.
Fax Broadcast Sets whether to print a transmission report after
every fax transmission to multiple destinations
or only when an error occurs.
Fax Protocol Sets whether to print the protocol monitor
report after every fax transmission or only when
an error occurs.