Filter
Top Products
88
| Understanding the System Menus
❚
Admin Settings > PCL >
Draft Mode
Specifies whether to enable the Draft Mode feature, which saves toner by printing in the
Draft Mode. The print quality is reduced when printing in the Draft Mode.
❚
Admin Settings > PCL >
Line Termination
Adds the line termination commands.
❚
Admin Settings > PCL >
Default Color
Specifies the color mode. This setting is used for a print job that does not specify a Print
Mode.
❚
Admin Settings > PCL >
Ignore Form Feed
Specifies whether to enable the Ignore Form Feed feature, which ignores blank pages
that only contain form feed control codes.
❚
Admin Settings >
PS
Use the PS (PostScript) menu to change printer settings that only affect jobs using the
PostScript 3 Compatible emulation printer language.
❚
Admin Settings > PS >
PS Error Report
Specifies whether to enable the PS Error Report feature, which specifies the contents of
the errors concerning PostScript 3 Compatible page description language are printed.
The change becomes effective after the printer is turned off and then on again.
NOTE:
• Instructions from the PS driver override the settings specified on the operator panel.
❚
Admin Settings > PS >
PS Job Time-out
Specifies whether to enable the PS feature, which specifies the execution time for one
PostScript 3 Compatible job. The change becomes effective after the printer is turned off
and then on again.
Off The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF