Filter
Top Products
116
| Understanding the System Menus
❚
Tray Management > Tray Settings >
MPF
Specifies the paper loaded in the Multipurpose Feeder (MPF).
❚
Tray Management > Tray Settings >
Tray1
Specifies the paper loaded in tray1.
NOTE:
• For details about supported paper sizes, see "Supported Print Media.”
❚
Tray Management > Tray Settings >
Tray2
NOTE:
• The Tray2 setting is available only when the optional 550-sheet feeder is installed.
Specifies the paper loaded in the optional 550-sheet feeder.
❚
Tray Management >
Tray Priority
Sets the priority order of the paper trays for automatic tray selection. If paper trays
loaded with the same paper size and type exists, the paper tray is selected according to
this priority order.
Display Tray Prompt Select the checkbox to display a popup message that
prompts to set paper type and paper size when paper is
loaded in the MPF. The factory default is on (selected).
MPF Mode Use Panel Settings Uses the paper size and type specified on the operator
panel.
Use Printer Driver
Settings
Uses the paper size and type specified on the print driver.
Manual When the print job is started, the printer pauses the job
and shows the screen to prompt the user to load the
paper of the specified size and type. To continue the job,
check that the specified paper is loaded, and then tap
Continue in the screen on the touch panel.
Size Specifies the paper size.
Type Specifies the paper type.
Display Tray Prompt Select the checkbox to display a popup message that prompts to set
the paper type and paper size when paper is loaded in tray1. The
factory default is on (selected).
Size Specifies the paper size.
Type Specifies the paper type.
Display Tray Prompt Select the checkbox to display a popup message that prompts to set
the paper type and paper size when paper is loaded in the optional
550-sheet feeder. The factory default is on (selected).
Size Sets whether to specify the paper size automatically or manually.
Type Specifies the paper type.