Filter
Top Products
202
| Loading Print Media
If you do not load envelopes in the MPF right after they have been removed from the
package, they may bulge. To avoid jams, press firmly across the whole envelopes to
flatten them as shown in the illustration before loading the envelopes in the MPF.
• Use only same size envelopes for a single print job.
• The maximum height (quantity) of envelopes that can be loaded in the MPF is
approximately 5 mm (0.19 inch) (5 envelopes).
• When printing on envelopes, set the print media source to the MPF. From the print
driver, select Envelope for the paper type, and then select the correct size of the
envelope.
• Adjust the width guides accordingly after envelopes are loaded.
Envelope #10, Monarch, or DL
Load the envelopes with the flaps closed and the print side facing up. Make sure that the
flaps are on the left side when you face towards the printer.
Feed direction