Filter
Top Products
Connecting Your Printer to a Computer |
49
If you want to change the printer name, enter the printer name in the Printer name
box, and then click Next.
8 Select either Do not share this printer or Share this printer so that others on your
network can find and use it, and then click Next.
9 When the driver installation is completed, click Print a test page to verify installation.
If you want to use this printer as the default printer, select the Set as the default
printer check box, and then click Next.
10 Click Finish.
For Windows
®
10:
1 Extract the zip file you downloaded to your desired location.
D:\Drivers\XPS\Win_8\XPS-V4_H825cdw_S2825cdn_H625cdw.zip (D is the
drive letter of the optical drive)
2 Right-click the Start button, and then click Control Panel.
3 Click Hardware and Sound Devices and Printers Add a printer.
4 Click The printer that I want isn’t listed.
5 Click Add a local printer or network printer with manual settings Next Next
Have Disk Browse.
6 Select the inf file in the folder extracted in step 1, and then click OK.
7 Select the printer name, and then click Next.
If you want to change the printer name, enter the printer name in the Printer name
box, and then click Next.
8 When the driver installation is completed, click Print a test page to verify installation.
If you want to use this printer as the default printer, select the Set as the default
printer check box.
9 Click Finish.
Installing the Printer Control Language (PCL), PostScript (PS), and Fax
Driver with Network Connection
NOTE:
• To use the printer in a Linux environment, you need to install a Linux driver. See "Installing Printer
Drivers on Linux Computers (CUPS)."
1 Insert the Software and Documentation disc into your computer.
NOTE:
• If the Software and Documentation disc does not start, perform the following.
a For Windows
®
7:
Click Start All Programs Accessories Run.
For Windows
®
10:
Right-click the Start button, and then click Run.
b Enter D:\setup.exe (D is the drive letter of the optical drive), and then click OK.