MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS
BBFAILED:
Counts number of times bbRAM checksum was in error.
DIGISENT:
Each frame digipeated by the MFJ-1278B causes the counter to increase.
HOVRERR:
Increases when HDLC receiver is not serviced rapidly enough and data is lost. This counter
should never increment at any supported data rate.
HUNDRERR
Increases when the HDLC transmitter is not serviced rapidly enough and frames are aborted.
This counter should never be non-zero at any supported data rate.
RCVDFRMR:
Increases when Frame reject frames are received from a connected station.
RCVDIFRA:
Increases for each reception of an I frame from a connectee.
RCVDREJ:
Increases for each reception of an REJect frame from a connectee.
RCVDRNR:
Counts the number of AX.25 L2 receiver- not-ready frames received since power-up and
during connections. The count may be useful in gauging system throughput.
RCVDSABM:
Each received SABM frame addressed to the MFJ-1278B causes this counter to be increased
by one.
RXABORT:
RXABORT is a count of the number of hardware-detected HDLC abort events. A large
number of counts is perfectly normal and should not cause concern.
RXCOUNT: