Filter
Top Products
MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r
Default Mode Function Page
TXUIFRAME
ON|OFF on Packet Used to tell the MFJ-1278B what to do
with the unconnected information left in
its buffer.
6-129
U1 Unproto
-- I-command Pactor Initiates a 100 baud unproto connect. 6-129
U2 Unproto
-- I-command Pactor Initiates a 200 baud unproto connect. 6-129
UNPROTO
call1 CQ Packet Sets the digipeat and destination address
fields of packets sent in the unconnected
mode.
6-129
UNSHIFT ON|OFF on RTTY/ASCII Determines the way the SPACE character
is displayed in the RTTY/ASCII modes.
6-130
URepeats
nn 1 Pactor Specifies number of FEC data packet re-
transmissions.
6-130
USERS
n 1 Packet Controls the manner in which the
incoming connect requests are handled.
6-130
VISTICKS
n 0 Color SSTV Specifies the number of pixels sent at the
start of an SSTV picture that will use the
alternate Vistones modem configuration
list.
6-131
VISBREAKS
n see 6-132 Color SSTV This is the TVBreaks-like list used for
VIS decoding.
6-131
VISTONES
n see 6-132 Color SSTV This is the PIXTones-like list used for
transmitting ROBOT sync tones of 1100,
1200 and 1300 Hz.
6-131
WAitdisc
nn 20 Pactor Specifies number of cycles before replying
to other TNCs
6-132
WDMODE
ON|OFF off AMTOR Determines whether A mode Transmission
takes place any time you type a SPACE or
RETURN character.
6-132
WEIGHT
n 0 CW Sets the weight factor for the CW
transmission.
6-132
WRU
-- I-command AMTOR Causes the remote mode A "ARQ" station
currently in contact with you to transmit
its answer back message.
6-133
XFLOW
ON|OFF on All Enables the flow control. 6-133
XMITOK
ON|OFF on Packet Enables the transmit function. 6-133
XOFF
n $13 (^S) All Selects the MFJ-1278B stop character. 6-134
XOff
nn $13 Pactor Sets the Flow Control STOP character for
the Pactor mode.
6-134
XOn
nn $11 Pactor Sets the Flow Control START character
for the Pactor mode.
6-134
XON
n $11 (^Q) All Selects the MFJ-1278B restart character. 6-135