Epson MFJ-1278B Switch User Manual


 
MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r
Default Mode Function Page
BKONDEL
ON|OFF on Packet Determines the way the screen is updated
when a character is deleted in the
command mode.
6-19
BLP
ON|OFF on Packet Allows Host Mode operation 6-20
BTEXT
text blank Packet Specifies the text of the beacon packet. 6-21
BUDLIST
ON|OFF off Packet Determines if the packets listed in
LCALLS are to be displayed.
6-22
BUF
n 0-9 CW/RTTY/ Allows addressing of the ten user ASCII
programmable memories.
6-22
BUFKEY
nnn 9 CW/RTTY/ Allows the user to transmit the ASCII
buffer without using the (CTRL-T).
6-23
BUFTIME
n 0 CW Used to transmit buffer 0 when it is a non-
zero value at the set interval.
6-23
BWNL
ON|OFF off AMTOR Causes the MFJ-1278B to transmit when
it receives a <CR>.
6-23
CALIBRA
-- I-command All Used to transfer the control to the modem
calibration routine.
6-24
CALSET
n 0 All Specifies the count setting for use by the
calibration routing.
6-24
CANLINE
n $18 (^x) Packet Changes the cancel-line input editing
command character.
6-25
CANPAC
n $19 (^Y) Packet Changes the cancel-packet input editing
command character.
6-26
CBELL
ON|OFF off Packet Sends a bell tone through the computer or
terminal speaker when a packet
connection is made.
6-27
CBell
ON/OFF OFF Pactor Sends a bell through the computer
terminal speaker when a Pactor connect is
established.
6-27
CCITT
ON|OFF on RTTY Determines whether U.S. standard or the
internationally recognized character set is
used.
6-28
CHANGE
- I-command AMTOR Switches from receiver to transmitter in
AMTOR mode A "ARQ".
6-28
CHAT
- I-command M-Packet Allows SYSOP to break onto the
mailbox's connected link.
6-28
CHECK
n 30 Packet Sets a connection timeout. 6-29
CHECKV1
ON|OFF off Packet Enables the automatic idle-link-
disconnect feature for AX.25 L2V1
connections.
6-29
CHObell
ON/OFF on Pactor Sends a bell tone to the computer or
terminal when a Pactor changeover is
done.
6-30
CHOChar
nnn 25 Pactor Designates the Pactor changeover
character.
6-30
CMDchr
nnn $03 Pactor Deisgnates the Pactor return to command
mode character.
6-30