Filter
Top Products
Preface
Thank you four purchasing our FRENIC5000G11S or FRENIC5000P11S series inverter. This product is used
to drive a 3-phase electric motor at variable speed. As incorrect use of this product may result in personal
injury and/or property damage, read all operating instructions before using.
As this manual does not cover the use of option cards, etc., refer to relevant manuals for option operations.
Safety Instructions
Read this manual carefully before installing, connecting (wiring), operating, servicing, or inspecting the inverter.
Familiarize yourself with all safety features before using the inverter.
In this manual, safety messages are classified as follows:
WARNING
Improper operation may result in serious personal injury or death.
CAUTION
Improper operation may result in slight to medium personal injury or property
damage.
Situations more serious than those covered by CAUTION will depend on prevailing circumstances.
Always follow instructions.
Instructions on use
WARNING
• This inverter is designed to drive a 3-phase induction motor and is not suitable for a single-phase motor or
others, as fire may result.
• This inverter may not be used (as is) as a component of a life-support system or other medical device
directly affecting the personal welfare of the user.
• This inverter is manufactured under strict quality control standards. However, safety equipment must be
installed if the failure of this device may result in personal injury and/or property damage.
There is a risk of accident.
Instructions on installation
WARNING
• Mount this inverter on an incombustible material such as metal.
There is a risk of fire.
• Do not place combustible or flammable material near this inverter, as fire may result.
CAUTION
• Do not hold or carry this inverter by the surface cover. Inverter may be dropped causing injury.
• Ensure that the inverter and heat sink surfaces are kept free of foreign matter (lint, paper dust, small chips
of wood or metal, and dust), as fire or accident may result.
• Do not install or operate a damaged inverter or an inverter with missing parts, as injury may result.