Fujitsu CM71-00101-5E Server User Manual


 
xi
Main changes in this edition
Page Changes (For details, refer to main body.)
-
Be sure to refer to the "Check Sheet" for the latest cautions on development. is changed.
("Check Sheet" is seen at the following support page... is deleted.)
i
" Objectives and intended reader" is changed.
( "FR" "FR*" )
" Objectives and intended reader" is changed.
( " *: " is added. )
"PREFACE" is changed.
( " Trademark" is added. )
"PREFACE" is changed.
( "The company names and brand names herein are the trademarks or registered trademarks of their
respective owners." is added. )
9
"Table 2.1-1 Structure of a Vector Table Area" is changed.
For 3F8H, ( "No" "Yes" )
18
" Lowest Bit Value of Program Counter" is changed.
( "incremented by one, and therefore" "incremented and therefore" )
20
"Figure 3.3-4 "ILM" Register Functions" is changed.
( A line from ILM to COMP is added. )
23
"Figure 3.3-7 Sample of Table Base Register (TBR) Operation" is changed.
( "31" "bit31" )
27
" System Stack Pointer (SSP), User Stack Pointer (USP)" is changed.
( "ST R13", "@-R15" "ST R13, @-R15" )
The title of "Figure 3.3-12 Example of Stack Pointer Operation in Execution of Instruction "ST R13", "@-
R15" when "S" Flag = 0" is changed.
( "ST R13", "@-R15" "ST R13, @-R15" )
28
The title of "Figure 3.3-13 Example of Stack Pointer Operation in Execution of Instruction "ST R13", "@-
R15" when "S" Flag = 1" is changed.
( "ST R13", "@-R15" "ST R13, @-R15" )
28
" Recovery from EIT handler" is changed.
( "4.2 Basic Operations in "EIT" Processing Recovery from EIT handler"
" Recovery from EIT handler"of "4.2 Basic Operations in "EIT" Processing" )
37
"4.3 Interrupts" is changed.
( "External" "User" )
" Sources of Interrupts" is changed.
( "External" "User" )