Filter
Top Products
xvi
185
"7.88 CALL (Call Subroutine)" is changed.
( "extension for use as the branch destination address" → "extension" )
"7.88 CALL (Call Subroutine)" is changed.
( "CALL 120H" →
" CALL label
...
label: ; CALL instruction address + 122
H
" )
"7.88 CALL (Call Subroutine)" is changed.
( "Instruction bit pattern : 1101 0000 1001 0000" is added. )
186
"7.89 CALL (Call Subroutine)" is changed.
( "Instruction bit pattern : 1001 0111 0001 0001" is added. )
187
"7.90 RET (Return from Subroutine)" is changed.
( "Instruction bit pattern : 1001 0111 0010 0000" is added. )
188
"7.91 INT (Software Interrupt)" is changed.
( "INT#9" to "#13", "#64", "#65" → "INT#9" to "INT#13", "INT#64", "INT#65" )
189
"7.91 INT (Software Interrupt)" is changed.
( "Instruction bit pattern : 0001 1111 0010 0000" is added. )
191
"7.92 INTE (Software Interrupt for Emulator)" is changed.
( "Instruction bit pattern : 1001 1111 0011 0000" ) is added.
192
"7.93 RETI (Return from Interrupt)" is changed.
( D2, D1, → S, )
193
"7.93 RETI (Return from Interrupt)" is changed.
( "Instruction bit pattern : 1001 0111 0011 0000" is added. )
194
"7.94 Bcc (Branch Relative if Condition Satisfied)" is changed.
( "extension, for use as the branch destination address." → "extension" )
195
"7.94 Bcc (Branch Relative if Condition Satisfied)" is changed.
( "BHI 50H" →
" BHI label
...
label: ; BHI instruction address + 50
H
" )
196
"7.95 JMP:D (Jump)" is changed.
( "Instruction bit pattern : 1001 1111 0000 0001" is added. )
197
"7.96 CALL:D (Call Subroutine)" is changed.
( "extension for use as the branch destination address" → "extension" )
Page Changes (For details, refer to main body.)