Filter
Top Products
Gentran:Server for Windows User’s Guide Gentran:Server for Windows – November 2005
Using Communications Receiving Documents
5 - 11
Receiving Documents
Introduction Any time a Send session is executed, the system automatically checks your
Mailbox for any information waiting to be received by your system. If any data is
in the Mailbox, it is received without any action from you.
If you need to receive information without first sending anything, you must
initiate a receive-only session using one of two methods:
◗ From the Commands menu, select the Receive command.
◗ Access the In Documents browser and click Receive.
Procedure:
method 1
To start a receive-only session, complete the following steps:
Procedure:
method 2
To start a receive-only session, complete the following steps:
Step Action
1
From the Commands menu, select Receive.
System response
The system displays the Communications Session Dialog Box.
2
Click OK to start a communication session to send data.
Note
The system initiates a receive-only session and the In Documents
Browser and ?In Documents Browser are updated with any data
received.
Step Action
1
From the View menu, select In Documents.
System response
The system displays the In Documents Summary dialog box.
2
Select the type of document for the appropriate partner and click
View.
System response
The system displays the In Documents Browser.
(Continued on next page)