Filter
Top Products
Checking for Overdue Acknowledgements Using Acknowledgements
Gentran:Server for Windows – November 2005 Gentran:Server for Windows User’s Guide
8 - 12
Checking for Overdue Acknowledgements
Introduction You can manually check for overdue acknowledgements by using the Overdue
Check feature.
Note
You can specify the frequency at which the system will check for overdue
acknowledgements (in whole minutes) in the System Configuration program. This
allows you to disable or reduce the frequency of overdue acknowledgement
checking.
Reference
See How to Change the Frequency of Overdue Acknowledgement Checking in
the Administration Guide for more information.
Procedure To check for overdue acknowledgements, complete the following steps:
Step Action
1
From the Commands menu, select Overdue Check.
System response
The system checks if any interchange, group, or document that
requires an acknowledgement is overdue (the system has not received
an acknowledgement for it and the specified time to do so has
expired). For any overdue interchange, group, or document, the
system sets the status to Overdue on the Interchanges Browser.
Reference
See Viewing Interchanges on page 7 - 10 for more information about
using the Interchanges browser.