Filter
Top Products
Gentran:Server for Windows User’s Guide Gentran:Server for Windows – November 2005
Using Partners Inbound Interchange Entry Dialog Box
3 - 33
Last Used
Control Number
Specifies a value that will be used to sequence check the
next interchange control number. The number will be
replaced by the control number on the last interchange
received. This box will initially be set to zero.
Note
This box is disabled if Sequence Checking is None.
Acknowledge
Interchange
Instructs the system to send a functional acknowledgement
to this trading partner when you receive the interchange set
defined in this relationship. The default value for this box
is not checked (do not expect an acknowledgement).
Ack Translation
Set ID
Select the acknowledgement you want generated for this
interchange.
Example
ANSI X12 = 997 Functional Acknowledgement
UCS/EDIA = 999 Acceptance/Rejection Advice
EDIFACT = CNTRL
Interchange
Transl. Obj.
Select a partner-specific Interchange Break Map
translation object if this trading partner interchange
deviates from the normal system behavior. You must select
a translation object from this list if you want the system to
perform partner-specific interchanging.
Warning
We strongly recommend that you do not change the
translation objects in the Interchange Transl. Obj. and
Acknowledge Transl. Obj. lists, unless you have a specific
reason for doing so.
(Continued on next page)
Part Function