Filter
Top Products
Gentran:Server for Windows User’s Guide Gentran:Server for Windows – November 2005
Using Process Control Viewing Events
11 - 35
3
If necessary, change the Refresh options:
◗ If you want to change the interval in which the dialog box is
automatically refreshed, type the interval (in seconds) at which
you want the system to refresh the dialog box (the default is 20
seconds) in the Seconds box. Valid values are 2 – 300 seconds.
Note
This value is saved when you change focus on the dialog box
(click another box). The Auto Refresh check box must be
selected for the Seconds box to be available.
◗ If you do not want the Active Events tab on the Gentran:Server
Process Control dialog box to automatically refresh (so you have
to manually click Refresh), click the Auto Refresh check box to
deselect it.
Notes
◗ The default for automatic refresh (so you do not have to click
Refresh) is enabled (checked).
◗ The default interval for refreshing the Event list is 10 seconds.
◗ The default for refreshing the display of the Session list is 2
seconds.
◗ If the Active Events tab has not been refreshed after an event has
expired (is no longer active), the system displays the event on the
Active Events tab (even though it is inactive), until the Active
Events tab is refreshed.
4
Click OK.
System response
The system exits the Gentran:Server Process Control dialog box.
Step Action