Filter
Top Products
This soft copy for use by IBM employees only.
If you have not partitioned your disk, you can do so now. We recommend that
you create only one partition at this stage, as we have found that creating more
than one partition may hang Windows NT during the installation process. You
can define all other partitions using Disk Manager once the installation is
complete. Figure 66 shows the display of a logical disk under the control of the
IBM ServeRAID RAID adapter.
Windows NT Server Setup
=======================
The list below shows existing partitions and space available for
creating new partitions.
Use the UP and DOWN ARROW keys to move the highlight to an item in the
list.
* To install Windows NT on the highlighted partition
or unpartitioned space, press ENTER.
* To create a partition in the unpartitioned space, press C.
* To delete the highlighted partition, press D.
+-------------------------------------------------------------------+
| 800MB Disk 0 at ID 0 on bus 3 on ispraidn |
| |
| Unpartitioned space 800MB |
| |
| |
+-------------------------------------------------------------------+
ENTER=Install C=Create Partition F1=Help F3=Exit
Figure 66. Selecting the Installation Partition
The display shown in the window above can be interpreted as follows:
Total disk capacity: 800 MB
It is the first disk: Disk 0
SCSI ID: 0
SCSI Bus#: 3 (the third channel of the ServeRAID controller)
Adapter device driver: ISPRAIDN (the driver for the ServeRAID adapter)
Press C to create a new partition. A panel similar to the one in Figure 67 on
page 93 appears.
92 PC Server and Windows NT Integration Guide