Filter
Top Products
This soft copy for use by IBM employees only.
To format a device:
1. From the main menu, select Advanced Functions.
The following menu appears:
IBM RAID Controller Configuration Ver 2.12
Adapter in Slot 1
┌───────────────────────────────┐
│ Advanced Functions │
├───────────────────────────────┤
│1. Help │
│2. Backup config. to diskette │
│3. Restore config. to diskette │
│4. Change write policy │
│5. Format drive │
│6. Change RAID parameters │
│7. Exit │
└───────────────────────────────┘
Figure 29. RAID Configuration Program - Advanced Functions Menu
2. Select Format drive.
3. With the spacebar, select the devices to format. They appear as FMT.
4. Press Enter to format the selected drives.
Notes
All the desired devices may be selected and formatted together to reduce the
time necessary for formatting.
The operation can be time consuming. It takes approximately 20 minutes to
format six 2 GB disks attached to the same adapter.
Chapter 2. Hardware Configuration 39