Filter
Top Products
This soft copy for use by IBM employees only.
IBM PC ServeRAID Adapter Disk Array MiniConfiguration Utility Ver. 2.00
┌──────────────────────────────────┐
│ Main Menu │
├──────────────────────────────────┤
│ View Adapter Status │
│ View Configuration │
│ Advanced Functions │
│ Exit │
└──────────────────────────────────┘
Select a choice using the Up and Down Arrow keys, then press Enter.
Figure 44. ServeRAID Adapter Mini-Configuration Utility
As well as viewing both the adapter status and the logical drive configuration,
you can perform a subset of administrative functions that you can do with the
configuration utility. Selecting Advanced Functions from the menu gives you a
window:
┌─────────────────────────────────────┐
│ Advanced Functions │
├─────────────────────────────────────┤
│ Reset Adapter │
│ Initialize Configuration │
│ Import Configuration from Drive(s) │
│ Boot CD-ROM and INT13 Extensions │
│ Adapter and PCI Information │
│ Exit │
└─────────────────────────────────────┘
The options you can select here are:
•
Reset Adapter
The option resets the adapter and runs all internal diagnostics. This does
not affect the data on the drives.
•
Initialize Configuration
This option resets the adapter configuration to factory defaults, and places
all drives in the ready (RDY) state.
Note: All configuration data will be lost.
•
Import Configuration from Drive(s)
This option reads the configuration from the drives and copies it to NVRAM
and EEPROM on the adapter.
Note: Configurations store in the adapter will be lost.
•
Boot CD-ROM and INT13 Extensions
Figure 45 on page 57 appears to allow you to configure the CD-ROM boot
options. See “Boot CD-ROM Configuration” on page 57 for more
information.
•
Adapter and PCI Information
56 PC Server and Windows NT Integration Guide