This soft copy for use by IBM employees only.
┌─────────────────────────────────────────────────────┐
│ Power-on Password │
├─────────────────────────────────────────────────────┤
│ Enter your new power-on password twice. │
││
│ Enter Power-on Password [ ] │
│ Enter Power-on Password Again [ ] │
││
│ Set or Change Power-on Password │
│ Delete Power-on Password │
││
│ Password Prompt [On ] │
└─────────────────────────────────────────────────────┘
The administrator password, if set, restricts access to the BIOS setup program to
authorized users only.
┌──────────────────────────────────────────────────────────┐
│ Administrator Password │
├──────────────────────────────────────────────────────────┤
│ Enter your new administrator password twice. │
││
│ Enter Administrator Password [ ] │
│ Enter Administrator Password Again [ ] │
││
│ Set or Change Administrator Password │
│ Delete Administrator Password │
││
│ Power-on password changeable by user [No ] │
└──────────────────────────────────────────────────────────┘
2.1.1.6 Start Options
Selecting this option shows the following window:
┌────────────────────────────────────────────────────┐
│ Start Options │
├────────────────────────────────────────────────────┤
│ Keyboard NumLock State [Off] │
│ Keyboard Speed [Fast ] │
│ Keyboardless Operation Mode [Disabled] │
││
│ First Startup Device [Diskette Drive 0] │
│ Second Startup Device [Hard Disk 0 ] │
│ Third Startup Device [Disabled ] │
│ Fourth Startup Device [Disabled ] │
││
│ Power On Self Test [Quick ] │
│ Virus Detection [Disabled] │
└────────────────────────────────────────────────────┘
You can specify the state of NumLock at boot time, and the repeat rate of the
keyboard. You can also specify whether the server can be started with or
without a keyboard.
This window also lets you specify the order in which devices in your system are
checked for bootable media. You can specify diskette drives, hard drives or
network adapter (some systems also allow the CD-ROM to be bootable).
You can also specify if built-in virus detection is enabled at boot time, and if you
want Quick or Enhanced POST.
Chapter 2. Hardware Configuration 7