Filter
Top Products
This soft copy for use by IBM employees only.
Figure 83. Completion of the Installation
Figure 83 shows the end of the installation process. In this dialog box you
are reminded to run the security manager in order to prevent unauthorized
users from gaining access to your server.
8. Reboot the server.
Failure to do so may cause unpredictable results.
For more information on the installation, refer to
Systems Management from an
NT Server Point of View
, SG24-4723.
6.3.2 Installation of TME 10 NetFinity Manager
You would normally install either the active client or the manager code on your
server. To install the TME 10 NetFinity Manager code on your server, use
ServerGuide 3.0′s CoPilot to install the code from CD-ROM. See 4.3.1, “CoPilot”
on page 75 for more information.
Alternatively, build the diskettes from ServerGuide 3.0′s Diskette Factory, then
run
NETFINST from this first diskette. See 4.3, “ServerGuide Main Menu” on
page 73 for more information about Diskette Factory.
The installation of the TME 10 NetFinity Manager is similar to the services
installation, except that instead of being asked for the type of client, you are
asked whether you want to use your manager with Web Enhancement support or
without it. Refer to Figure 84 on page 111.
The Web Enhancement function enables you to access your TME 10 NetFinity
Manager from any Web browser. Refer to Chapter 6 of
Systems Management
from an NT Server Point of View
, SG24-4723, for more information about this
function.
110 PC Server and Windows NT Integration Guide