Filter
Top Products
This soft copy for use by IBM employees only.
Set Features
Select one:
1. Set date and time 1
2. Set password and unattended start mode 2
3. Set keyboard speed 3
4. Set console 4
5. Set startup sequence 5
6. Set fast startup mode 6
7. Set power-on features 7
Enter F1=Help F3=Exit
Figure 18. Set Features Menu
The features found on this menu are described below:
1 Set date and time
This allows you to set the current date and time. Once set, CMOS RAM
keeps the date and time even when the system is powered off.
2 Set password and unattended start mode
This helps prevent the use of the server by unauthorized persons. Two types
of passwords are available from this option:
•
Power-on password
•
Administrator password
Refer to 2.4.1.7, “Set Passwords and Security Features” on page 29 for
details.
3 Set keyboard speed
This changes the speed at which characters respond when you type. There
are two options:
•
Normal keyboard
The normal keyboard speed displays the character on the screen at the
rate of 10 characters per second.
•
Fast keyboard
The fast keyboard speed displays the character on the screen at the rate
of 30 characters per second.
4 Set console
This changes the server console. The server console is the hardware that
you use to communicate with your server. There are three options for this
setting:
1. Display and keyboard
Chapter 2. Hardware Configuration 27