Filter
Top Products
This soft copy for use by IBM employees only.
IBM RAID Controller Configuration Ver 2.12
┌──────────────────────────────┐
│ Select Adapter │
├──────────────────────────────┤
│ 1. Help │
│ 2. RAID Controller in slot 1 │
│ 3. RAID Controller in slot 2 │
│ 4. Exit │
└──────────────────────────────┘
Figure 26. RAID Configuration Program - Adapter Selection
Use the arrow keys to select the adapter you want to configure and press Enter.
A panel similar to the one in Figure 27 will appear.
IBM RAID Controller Configuration Ver 2.12
Adapter in Slot 1
┌───────────────────────────────┐
│ Main Menu │
├───────────────────────────────┤
│1. Help │
│2. View configuration │
│3. Create/delete Array │
│4. Initialize/synchronize array│
│5. Rebuild device │
│6. Advanced functions │
│7. Drive information │
│8. Exit │
└───────────────────────────────┘
Figure 27. RAID Configuration Program - Main Menu
2.5.1.1 Drive Information
During this first step, we verify that all the installed units are recognized and
available for future use.
Select Drive Information on the main menu.
The following panel appears:
Chapter 2. Hardware Configuration 37