Filter
Top Products
This soft copy for use by IBM employees only.
┌────────────────────────────────────────────────┐
│ Devices and I/O Ports │
├────────────────────────────────────────────────┤
│ Serial Port A Address [3F8h-IRQ 4] │
│ Serial Port B Address [2F8h-IRQ 3] │
│ Infrared [Disabled] │
│ Infrared DMA [Disabled] │
││
│ Parallel Port [3BCh-IRQ 7] │
│ Parallel Port Mode [Standard] │
│ Parallel Port Extended Mode [ ] │
││
│ Mouse [Installed ] │
││
│ Diskette Drive A: [1.44 MB 3.5″ ] │
│ Diskette Drive B: [Not installed] │
└────────────────────────────────────────────────┘
You can specify the I/O address and IRQ for the two COM: ports on your server,
the I/O address of the Infrared port (if your PC Server has one, like the Server
330) and the address and type of parallel port (standard, bidirectional, EPP/ECP).
2.1.1.4 Alarm/Wakeup Settings
With this option, you can configure your server to automatically start at a set
time up to one month in advance.
┌────────────────────────────────────────────────────────────────┐
│ Alarm/Wakeup Settings │
├────────────────────────────────────────────────────────────────┤
│ Warning: │
││
│ If you enable a choice on this menu and save │
│ the settings, the server will be halted and │
│ must be powered off. The Wakeup choices are │
│ disabled when the server is restarted. │
││
│ Wakeup Timer [Disabled ] │
│ Wakeup Date [10] │
│ Wakeup Time [00:00:00] │
│ Wakeup on Ring [Disabled] │
└────────────────────────────────────────────────────────────────┘
Note: This setting is to start the server one time only. You cannot use it to start
multiple times. Once you set this option, you must power off the server. If you
manually power the server back on, the wakeup options will be disabled, and
you will need to reset them.
2.1.1.5 System Security
From here, you can specify a power-on password (POP) and an administrator
password.
Selecting Power-on Password lets you set change or delete the POP. You can
also specify if a prompt for the POP (if it is set) will appear at boot time.
If the POP is set and you specify On for Password Prompt, the server will not
boot until you enter the password. If you specify Off, the system will boot with
the keyboard locked and user input will be ignored until the POP is entered.
6 PC Server and Windows NT Integration Guide