Filter
Top Products
This soft copy for use by IBM employees only.
4 Set configuration
This option contains programs used to view, change, back up, or restore the
configuration information. It also contains the Automatic Configuration
program.
The configuration information consists of:
•
Installed system options
•
Memory size
•
Adapter locations and assignments
•
SCSI subsystem parameters
5 Set Features
This option allows you to set system parameters such as date and time, type
of console, startup sequence, fast startup mode, and passwords.
6 Copy an options diskette
Micro Channel machines use configuration files called adapter descriptor
files (.ADF files) in order to know what parameters and values are available
for the adapter. This option copies configuration and diagnostic files from
an option diskette to the system partition or to the backup copy of the
system programs diskettes. The server needs these files to make the new
options operational.
Attention!
This utility will prompt you for both the reference diskette and the
diagnostic diskette so that the proper programs can be copied from the
adapter option diskette to these diskettes. Make sure that you have
copies of both diskettes before you select this utility. These diskettes
can be obtained from Diskette Factory on the ServerGuide CD.
7 Test the computer
Run diagnostics on the system hardware. These tests show if the hardware
is working properly. If a hardware problem is detected, an error message
appears explaining the cause of the problem and the action to take.
8 More utilities
This option is a set of utilities that displays information which is helpful when
service is required. Revision levels and the system error log are some of
the utilities available in this option.
2.4.1.4 Backup/Restore System Programs Menu
When you select this option from the Main Menu, a panel like the one in
Figure 13 on page 21 will appear.
20 PC Server and Windows NT Integration Guide