This soft copy for use by IBM employees only.
2.1.1.2 System Information
This choice also shows read-only summaries of your server, divided into two
sections:
•
Product Data
•
PCI Routing
Selecting Product Data shows you the following information (as per our test
Server 330):
┌─────────────────────────────────────────────┐
│ Product Data │
├─────────────────────────────────────────────┤
│ Machine Type/Model 8640ESS │
│ Flash EEPROM Revision Level RAET27AUS │
│ System Board Identifier J113965H38X │
│ System Serial Number 23LG592 │
│ BIOS Date 11/18/96 │
└─────────────────────────────────────────────┘
On our test server, we see it is a Server 330 (machine type/model 8640-ESS) with
a serial number 23LG592, and a BIOS level RAET27AUS dated 11/18/96. This
information is required by IBM Service if you need to place a service call on
your machine. The machine type/model and serial number should match the
numbers printed on the bottom of the front of your server.
Selecting PCI Routing shows you the following information.
┌─────────────────────────────────────────────┐
│ PCI Routing │
├─────────────────────────────────────────────┤
│ Planar SCSI INT_A is Routed to IRQ11 │
│ Planar Ethernet INT_A is Routed to IRQ10 ││
│ PCI Slot 1 INT_A is not Routed ││
│ PCI Slot 1 INT_B is not Routed ││
│ PCI Slot 1 INT_C is not Routed ││
│ PCI Slot 1 INT_D is not Routed ││
│ PCI Slot 2 INT_A is not Routed ││
│ PCI Slot 2 INT_B is not Routed ││
│ PCI Slot 2 INT_C is not Routed ││
│ PCI Slot 2 INT_D is not Routed ││
│ PCI Slot 3 INT_A is not Routed ││
│ PCI Slot 3 INT_B is not Routed ││
│ PCI Slot 3 INT_C is not Routed ││
│ PCI Slot 3 INT_D is not Routed ││
│ PCI Slot 4 INT_A is not Routed ││
│ PCI Slot 4 INT_B is not Routed ││
│ PCI Slot 4 INT_C is not Routed │
└─────────────────────────────────────────────┘
This window indicates the IRQs to which the PCI interrupts are routed to. It is a
scrollable window.
2.1.1.3 Devices and I/O Ports
This option from the main menu gives you the ability to change the details of
your ports and diskette drives.
Chapter 2. Hardware Configuration 5