Filter
Top Products
This soft copy for use by IBM employees only.
F4 Retry.
F7 Restore the configuration from diskette. Press F7 when you replace a
faulty adapter or when you move an entire disk array from one
system to another without also moving the adapter.
New Adapter
There may be situations (for example using a factory-fresh
adapter as the replacement) where the F7 option does not appear.
If you need to restore a configuration from diskette, do the
following:
1. Restart the server.
2. When prompted during POST, press Ctrl+I to enter the
MiniConfiguration Utility.
3. Select Advanced Functions.
4. Select Import Configuration from Drives to Adapter.
5. Follow the instructions on the panel.
Chapter 2. Hardware Configuration 59