CHAPTER 1 NDA-24296
Page 2
Revision 1.0
2. MOUNTING LOCATION OF CIRCUIT CARD
The control circuit cards for the 1 IMG system should be mounted in their dedicated slots as shown in Figure 1-
1. The control circuit cards for the 4 IMG system should be mounted in their dedicated slots as shown in Figure
1-2. The control circuit cards for the IPX-U system should be mounted in their dedicated slots as shown in
Figure 1-3 and 1-4.
As a general rule, the blue pull tab line/trunk circuit cards are mounted in the universal slots that are located in
Slots 04 - 12 and 15 - 23 of the Port Interface Module (PIM).
The yellow pull tab line/trunk circuit cards (MISC) are mounted in Slots 00 - 02 of the LPM.
Additional GT/LANI cards are mounted in the CPR.