Filter
Top Products
CHAPTER 3 NDA-24296
Page 526
Revision 1.0
PA-4DATA
Digital Announcement Trunk
Note 6:
When this circuit card is using an external music-on-hold source, set 0, 4 or 6 by timer mode.
SWITCH
SWITCH
NO.
SETTING
STANDARD
SETTING
MEANING
MRCS
(SW9) Note 6
E
Set to E while the circuit card is using as announcement
equipment only.
0
Designation of No. 0 Circuit.
The timer is 16-sec. mode.
1
Designation of No. 1 Circuit.
The timer is 16-sec. mode.
2
Designation of No. 2 Circuit.
The timer is 16-sec. mode.
3
Designation of No. 3 Circuit.
The timer is 16-sec. mode.
4
Designation of No. 0 and No. 1 Circuit.
The timer is 32-sec. mode.
5
Designation of No. 2 and No. 3 Circuit.
The timer is 32-sec. mode.
6
Designation of All Circuits.
The timer is 60-sec. mode.
F Recording from a telephone set.
MBRQ
(SW10)
0
ON
No. 0 Circuit make busy request
No. 0 Circuit is designated during a recording.
OFF
×
No. 0 Circuit make busy request cancel
1
ON
No. 1 Circuit make busy request
No. 1 Circuit is designated during a recording.
OFF
×
No. 1 Circuit make busy request cancel
2
ON
No. 2 Circuit make busy request
No. 2 Circuit is designated during a recording.
OFF
×
No. 2 Circuit make busy request cancel
3
ON
No. 3 Circuit make busy request
No. 3 Circuit is designated during a recording.
OFF
×
No. 3 Circuit make busy request cancel
WR
(SW12)
UP Recording from a tape recorder (WRITE mode)
DOWN
×
Normal setting