CHAPTER 3 NDA-24296
Page 402
Revision 1.0
PA-M96
HUB
5. Switch Setting
Standard settings for switches on this circuit card are shown in the table below.
SWITCH
NAME
SETTING
STANDARD
SETTING
DESCRIPTION
MB
UP Circuit card Make-busy.
DOWN × Circuit card Make-busy cancel.
SENSE
0 Polarity indication on the STn lamps for TPn-X ports (n = 0~7).
1 Not used.
2 × TPn-X ports operate as a repeater HUB. (n = 0~7).
3
Data-Packet-Collision indication on the STn lamps for TPn-X ports
(n = 0~7).
4 - F Not used.