CHAPTER 2 NDA-24296
Page 42
Revision 1.0
PH-GT09
Gate
4. Lamp Indications
Lamp indications for this circuit card are shown in the table below.
5. Switch Settings
Standard settings for switches on this circuit card are shown in the table below.
Note:
Prior to extracting the GT card, flip the MBR switch on and then flip the MB switch on.
6. External Interface
See the NEAX2400 IPX Installation Manual.
7. Switch Setting Sheet
LAMP NAME COLOR STATE
OPE/MB Green Remains lit while this circuit card is in ACT state.
SWITCH
NAME
SETTING
STANDARD
SETTING
MEANING
MB
UP Make-busy of circuit card
DOWN × Normal setting
MBR
Note
UP
When the ACT side of GT’s MBR switch is flipped, the ST-BY side of
TSW, DLKC, and GT is forced to switch over the ACT side. (When
the TSW is dual configuration.)
DOWN × Normal setting.
SWITCH NAME SWITCH SHAPE REMARKS
MB
MBR
ON
ON