Filter
Top Products
Chapter 4 - Advanced Configuration for your Network Environment
© Polycom, Inc. 2003 103
Configuration for ISDN (H.320) Calls
This section contains advanced ISDN configuration information for
the V.35/RS-449/RS-530 and BRI network interfaces. The
information displayed on the various ISDN configuration screens
varies according to the network interface that is attached to your
ViewStation EX system.
The configuration information is divided into:
❑ Advanced V.35/RS-449/RS-530 Network Interface
Configuration
❑ Advanced Quad BRI Network Interface Configuration
Once your ISDN configuration is complete, you may want to place
a test call. For information about placing a call, refer to Video Calls
on page 148.
Advanced V.35/RS-449/RS-530 Network Interface
Configuration
This section describes information and settings for the following
advanced V.35/RS-449/RS-530 configuration screensR:
❑ Advanced V.35 (Setup). See Configuring the
V.35/RS-449/RS-530 Serial Interface Control Signals, on page
104.
❑ Broadcast Mode. See Setting up Satellite (H.331) Broadcast
Mode, on page 105.
❑ Dialing Speeds. See Selecting Dialing Speeds, on page 106.
❑ Advanced Dialing (Calling Profile, Prefix, Suffix). See Setting
the Calling Profile, on page 108.
❑ Crypto Resync Pulse. See Enabling Crypto Resync on page 110.
Notes
The V.35/RS-449/RS-530 network interface supports the V.35,
RS-449, or RS-530 protocol depending on the cable you use to