Chapter 4 - Advanced Configuration for your Network Environment
© Polycom, Inc. 2003 127
Figure 4-22. Dialing Rules 1 Screen
You can configure the following network dialing rules:
❑ Number of digits in Extension—Set the number of digits in
your dialing extension. This usually applies to systems that are
on a PBX. Sites that dial your system with the same area code (or
city code) and prefix dial use only your extension number. For
example, if your system’s number is 1 512 555 1212 and you set
5 as the number of digits in your extension, a system with the
number 1 512 555 1212 will use 51212 to dial your system.
❑ International Dialing Prefix—Enter the prefix that must be
used to place international calls. This prefix is automatically
appended to any international calls made from the GAB. This
overrides the international dialing prefix that is normally
transparently set in the system Country screen.
❑ Public Network Access—Enable this option if your system can
dial outside of your private network.
❑ Public Network Dialing Prefix—Enter a dialing prefix as
required by your PBX to dial out to the public network. This
prefix is automatically inserted before the dialing numbers to
the public network from the GAB.
❑ Public Network (same area code) Prefix—Enter a prefix if one
is required to call within the same area code.
❑ Private Network Access—Enable this option if your
organization uses a private network for calls.