Filter
Top Products
ViewStation EX User Guide
310 www.polycom.com
VCR Setup
To access the VCR Setup screen:
Select System Info > Admin Setup > Video/Camera > VCR. The
following screen appears:
Figure A-6. VCR Setup Screen
The VCR Setup screen lets you enable the following options:
❑ VCR Record Source—You can set the VCR Record Source to the
following settings:
•Auto: When set to Auto, the VCR automatically records the
current speaker in a point-to-point call.
• Near: When Near is selected, the VCR records the near-site
presentation.
•Far: When Far is selected, the far-site is recorded. Audio
from the near and far sites is always recorded.
❑ VCR Audio Out Always On—When this option is enabled, the
system can operate with two VCRs, one for recording and one
for play. This also allows the use of the VCR audio out for room
audio applications where the near-site and the far-site audio are
required with any video input selected.
Notes
1. If you connect the same device to both the VCR input and
VCR output, then you may need to disable this feature to
prevent an audio feedback loop.