Filter
Top Products
Chapter 7 - Using the System with a PC
© Polycom, Inc. 2003 251
4. Enter the Management Password. Re-enter the Management
Password.
5. Clisk the Apply button to install the settings.
When you try to access a screen that is password protected, you are
prompted to enter the Management Password. If the wrong
password is entered, you are not allowed to access the screen.
The Management Password overrides the Admin Password. For example,
if you have both an Admin Password and a Management Password,
use the Management Password to log into the system from the
PMAC utility.
Password-Protecting Individual Screens
In order to password-protect screens, a Management Password
must be created first (see preceding section). Then, from the Screen
Access tab, you can specify which screens to lock.
To password-protect (lock) an individual screen:
1. Launch the PMAC utility.
2. Enter the IP Address and Password of your system.
3. Select the Screen Access tab.
4. Double- click an item in the left column (Select Screens from).
While holding the Ctrl key on the keyboard, single-click as
many items in that column.
Table 7-1. Password Usage with PMAC
Admin Password
Management
Password
Password to Use When
Using PMAC
Ye s No Admin
Ye s Ye s Management
No Ye s Management
No No No password